Zeevee EAS - Emergency Alert System (QAM & DVB-T/C) Manual de usuario descargar pdf (Pagina 2)

2www.zeevee.com

GENERATING EAS ALERTS

For EAS-NET, congure using Maestro as follows:

1. Open Maestro.

2. Click on the Device tab and enable Show advanced controls.

3. Change the “Disabled” status below the EAS Mode eld to specify the type of EAS mode

(EAS Net).

4. Specify a port value in the EAS Port eld. EAS Port has an allowable range of 0-65534. Note

that port values between 1 and 1023 are well known ports and should be avoided. ZeeVee

recommends using a port value of 4096 or greater. In the case that a port value is specied

that results in a system conict (e.g. 80), Maestro will display an error once the conguration

is applied. The EAS port should be identical on all devices in a multi-unit deployment.

5. (Optional — For use of EAS Relay only) Change the EAS Relay to “On”. The EAS Relay

conguration is required only for installations where more than eight EAS-Net devices are

installed. Monroe R189 allows only eight devices to be congured, so the relay feature

provides a way to use more than eight devices. This number includes both ZeeVee and

non-ZeeVee devices.

Only one ZeeVee unit should be set up as a relay per installation or headend.

By default the EAS Relay is

off. When the EAS Relay is

set to “On”, the system will

forward the alert sent by the

Monroe R189 to all other known

ZeeVee devices. The alert is

forwarded sequentially so a large

installation might see a delay

before all modulators begin

processing the alert.

The ZeeVee EAS Relay feature

allows you to congure one

ZeeVee unit in the Monroe R189.

That one device communicates

with the Monroe box and its

information cascades down to

the other ZeeVee units.

6. Connect ZeeVee units to one or more NTP servers. This connection ensures that all

system clocks are in sync so when the Monroe sends an alert to the ZeeVee device, the

alert processes at the appropriate time.

To connect, click on the Device tab and enable Show advanced controls. Then ll in the

fully qualied domain name as appropriate in the NTP server elds.

Conguring Maestro for EAS-NET

1 2 3 4 5 6 7 8 9

Sin comentarios

Zeevee EAS - Emergency Alert System (QAM & DVB-T/C) Manual de usuario Pagina 2